7
1.
Press the
NATURE
button when the
SPEED
mode is set to
LOW
wind speed. This will
program the unit to work in
NATURE
mode with
LOW
wind speed. At this time, both the
LOW
and
NATURE
indicators will turn on. The wind speed will automatically change
according to this schedule:
MED
speed 5 sec.
à
LOW
speed 15 sec.
à
MED
speed 5 sec.
à
LOW
15 sec.
à
stop 5 sec.
à
MED
speed 5 sec.
à
LOW
speed 10 sec.
à
MED
speed 5 sec.
à
LOW
10 sec.
à
stop 5 sec.
à
MED
speed 5 sec.
à
LOW
speed 20 sec.
à
stop 5 sec.
The unit will operate in this cycle until the power is turned off.
SPEED Button
1.
When the
POWER
button is pressed, the
HIGH
speed indicator will turn on and the unit will
operate on the strongest wind setting.
2.
Press the
SPEED
button once again. At this time, the
MED
speed indicator will turn on
and the unit will operate on the medium wind setting.
3.
Press the
SPEED
button once more. The
LOW
speed indicator will turn on and the unit
will operate on the lowest wind setting.
SWING Button
1.
Press the
SWING
button. At this time, the indicators will turn on and the louvers will
swing (covers 60 degrees horizontally).
2.
Press the
SWING
button again to stop the unit at is desired position. The indicator will
turn off at this time.
TIMER Button
1.
Press the
TIMER
button to set the timer. Every press will add another 30 minutes of operating
time with a maximum of up to 7.5 hours. The programmed time will be indicated on the
display.
2.
To stop the timer, press the
TIMER
button 16 times (one more press after reaching 7.5 hours).
The
TIMER
indicator will turn off.
COOL Button
1.
Press
the
COOL
button. If the tank is filled to a sufficient level, the
COOL
indicator will
turn on and the pump will begin to work.
2.
After about 3 minutes, the unit will provide cool, humidified air.
3.
Press the
COOL
button again to shut off the pump. The
COOL
indicator will turn off, and
the unit will produce fresh, dry air.
Please Note:
1.
If the
COOL
button is pressed when there is insufficient water in the tank, an alarm will
sound after 90 seconds. The
COOL
indicator will continue to flash for 10 seconds.
After 10 seconds, the alarm will stop and the
COOL
indicator will also turn off.
2.
The unit can also be used without water. In this case, it will operate as a normal electric
