8
http://www.NewAir.com
CLEANING & MAINTENANCE
CLEANING YOUR COOLER
To clean your cooler:
Unplug the cooler and remove anything inside.
Wash the inside of the unit with a solution made of warm water and neutral
detergent. Do not use abrasive cleaners.
Use mild, soapy water to clean the unit’s door seal.
To ensure efficient operation, also thoroughly clean the back and bottom of
the beverage cooler.
To clean the outside of the unit, use a mild detergent and warm water.
DEFROSTING YOUR COOLER
To prevent ice buildup on the inside of the beverage cooler, it may be
necessary to defrost occasionally:
1.
Turn the temperature control to #4 or #5.
2.
Wait 30 to 60 minutes.
3.
Turn control knob back to #1 or #2.
If you notice an excess amount of frost buildup inside the unit, follow these
steps to remove it:
1.
Unplug the beverage cooler.
2.
Allow frost to melt from the inside of the cooler. If necessary, use a
plastic utensil to scrape ice from the interior surface.
3.
Dry thoroughly before plugging it in again.
MOVING YOUR COOLER
To move your cooler:
Remove anything stored inside.
Securely tape down all loose parts located inside the unit.
Turn the leveling feet up to the base in order to avoid damage.
Tape the door shut.
Be sure the cooler stays in an upright position during transportation.
