Newage Pro 3.0 Series Installation Instructions Manual Download Page 5

                 

 5

Tools Needed

1 x 

12” 

Magnetic Leveler

1 x 

#2 Phillips Bit

1 x 

Tape Measure 

1 x 

7/16” socket

1 x 

Cordless Power Drill

1 x 

Stud Finder

1 x 

Pencil

1 x  

Set

  Square

1 x 

Hammer Drill

1 x 

Masonry Bit

1 x 

Adjustable wrench

1 x 

7/16” Socket driver 

wrench

1 x 

8mm” Socket driver

 wrench

 1 x 

#2 Phillips

 head screw driver

 1 x 

#3 Phillips

 head screw driver

[optional for masonry]

1

1

2

3

2

3

Manufacturer Warranty Limited Life

time

1. 

Service calls to correct the installation of any NewAge products or to instruct you how to use or install them.

2. 

Damage resulting from improper handling or shipping of products, or products damaged by accident, misuse, abuse, ire,  

lood, improper installation, acts of God, neglect, corrosion, modiication or mishandling.

3. 

Products damaged by improperly loading beyond the speciied maximum weight capacity outlined in the instructions provided 

with the product.

4. 

Repairs or replacement when your product is used in other than normal, single-family household use, such as a commercial  

environment, or handled in anyway inconsistent with the installation instructions included with the product.

5. 

Cosmetic damage, including scratches, dings, dents or cracks in paint that do not afect the structural or functional capability  

 

of the product.

6. 

Surfaces damaged due to chemical interaction resulting in corrosion of paint or metal.

7. 

Replacement parts for NewAge products outside Canada and the United States.

8. 

Replacement keys or locking mechanisms.

9. 

Loss of product contents due to theft, ire, lood, accident or acts of God.

10.  Shipping or freight fees to deliver replacement products or to return defective products.

11.  Any labor costs during the limited warranty period.

When this product is installed, operated and maintained according to the instructions attached to or furnished with the product, 
NewAge Products Inc. will replace the defective product or parts if the part fails as a result of defective materials or workmanship 
for the Lifetime of the product.

NEWAGE PRODUCTS INC. WILL NOT PAY FOR:

IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED 
TO ONE YEAR, OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS 
ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT 
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE 
TO STATE OR PROVINCE TO PROVINCE

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

Summary of Contents for Pro 3.0 Series

























Reviews: