7
www.newageproducts.com
all
Installing Backsplash for Fixed Cabinets
Plac
e fixed bottom strip tight
against the wall and the top of the
worktop. If your cabinet set does
not have lower cabinets with a
worktop proceed to page 9
Interlock bottom of Slatwall section
with the top of fixed bottom strip.
Repeat step 5 to securely fasten
“Slatwall Section”.
Interlock Top Magnet Cover on top
of the slatwall section and secure
in position with magnets.
Pre-drill 3mm (1/8”) holes into each
stud then fasten slatwall section to
each wood stud with screws provided.
Repeat steps 5 & 6 for remaining
slatwall sections.
Masonry.
4
5
7
6
8
• Follow steps 4 to 8.
• Drill pilot holes through the perforated
strip each 16in with hammer drill &
masonry bit.
• Use 2¼” x ¼” Tapcon Concrete Anchor
for each pilot hole. (Not Included)
• OR
use #10 x 2” Screw with 3⁄16” masonry
plug for each pilot hole. (Not Included)
