Step 1
Remove the cover and apply
two thick lines of NEWA gel,
making sure the electrodes
area is covered completely.
Step 2
Spread the NEWA gel on the
treatment area in a circular
motion.
■
Make sure your NEWA+ is fully charged
before starting treatments. We recommend
charging NEWA+ overnight before starting a
treatment.
■
Remove the charger from the NEWA+
device
■
You can treat your forearm first to see how
your skin reacts to NEWA+.
■
Remove all jewelry from the treatment
areas. Thoroughly clean and dry your face.
■
Choose your treatment area (from a total of
3 areas).
■
It is recommended to perform 3-5
treatments a week for a period of one
month. For maintenance use NEWA+ twice
a week.
Treatment
Step 3
Turn on the device by moving
the power level switch to 2.
The blue LED will turn on.
Step 4
Press and release the button.
The blue LED will start
blinking.
Step 5
Begin treatment. Make
sure the active tip area and
electrodes are in full contact
with the skin.
The LED will blink green when
your skin reaches optimal
treatment temperature.
If you find treatment at level
2 uncomfortable, move the
power switch to level 1.
■
Do not stop the circular movement
of the device.
■
NEWA+ will vibrate after 4 minutes
signaling the end of the treatment.
Apply more gel before moving to
the next treatment area.
■
At the end of the treatment gently
clean your face and remove
excess gel.
■
If NEWA+ is turned on but not in
use, it will automatically turn off
after a few minutes. To restart the
NEWA+, move the power switch
to 0, and then slide it back to 2.
■
To maximize battery life, it is
recommended to charge NEWA+
at least once every two weeks,
over night.
■
To get the best out of your NEWA
device, it is vital to properly clean
it after each treatment. Simply
follow these easy instructions:
1. Make sure your NEWA is
switched off and disconnected
from the power source. 2. Lightly
dampen a washcloth with water.
3. Gently wipe the electrodes
of your device to remove any
remaining gel residue. 4. Gently
wipe down the case of your
device. 5. Let your NEWA air dry
Start your NEWA+ treatment:
Before you start
1
2
1
3
3
2
ND_PDC00126-00 A01_QRG, Newa+, 15x15cm, EN.indd 2-3
ND_PDC00126-00 A01_QRG, Newa+, 15x15cm, EN.indd 2-3
13/10/2020 13:01:52
13/10/2020 13:01:52
