13
EN
c. Check the water level. If it is too low, top it up to the required level with water at about the same temperature as the water in
the aquarium.
d. Check the water temperature using the immersion thermometer provided.
EVERY MONTH:
a. Replace the carbon filter by choosing from those available in the “NEWA AQUA media filter” range.
EVERY 3 MONTHS:
a. Rinse the foam cartridge using the aquarium water, so that the bacterial colonies are preserved.
b. Clean the bottom of the aquarium by gently sucking up any deposited sediment. It is advisable to use the NEWA Power Gravel
Cleaner gravel cleaning set. This operation should be done with great care in order not to uproot any plants or leave any roots
uncovered.
c. Remove any deposits from the rotor and the pump impeller.
VII. TROUBLESHOOTING
If installation has been carried out correctly and the electrical accessories are operating normally, it is unlikely that any
technical problems will arise. If they should, consult an installer specialised in electrical appliances or contact the aquarium
product dealer to make a careful check or to replace the aquarium.
FAULTS
CAUSES
SOLUTIONS
The cover does not remain
properly closed.
The cover does not remain properly closed.
Apply specific pads on a movable part or along
the perimeter of the support, making it finally
completely horizontal (Fig. 10).
The perimeter of the support is not
horizontal.
Contact your local dealer
The lighting system are not
in operation
The lighting system is not connected to
the mains power supply socket or the jacks
between the power supply and the LED
hood cable are not properly connected.
Connect the plug to the electrical socket
A temporary black out
---
The lighting system is not operating
correctly
Contact your local dealer
Limited or no water flow
The flow pump is not connected to the
electrical socket
Connect the plug to the electrical socket
The filter cartridge is clogged
Rinse or replace the filter cartridge
The pump is clogged due to dirt or wear
and tear on the rotor
Carry out maintenance on the pump.
The pump is not operating correctly
Contact your local dealer
Summary of Contents for Mirabello MIR 30
Page 35: ......
