
15
EN
12) If the aquarium is within children’s reach, take special precautions and check correct installation and operation several times.
13) The maximum water temperature conveyed from the pump must not exceed 35°C.
14) The aquarium must not run dry.
15) The aquarium has glass components. Handle it with care and position it according to the instructions given in this manual,
avoiding placing the tank directly on its edges.
16) Do not place the aquarium on tilting surfaces (Fig. 10).
17) After installation, do not move the aquarium. If necessary, only move it if the tank is completely empty.
18) Each component is an integral pa rt of the aquarium and must not be used with other products.
19) Do not use the aquarium for food use.
20) Do not use the aquarium as a terrarium.
21) Do not use the aquarium if it is damaged and /or dismantled.
22) Do not damage and/or remove the seal on the couplings of the glass panels of the tank.
23) Do not place rocks, stones or other heavy ornamental elements directly on the bottom of the tank.
24) Do not position any objects on the aquarium.
25) It is important for the aquarium, just like all other electrical appliances, to be protected upstream by a special differential
safety switch (safety cutout) with a trip current of Idn < 30 mA.
26) We recommend to switch-off the lamp off during maintenance and never fix it when it is on.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
II. TECHNICAL DATA
young
young-MF
Version
(220-240V, 50Hz)
MIR30 young MIR60 young MIR30 young-MF MIR60 young-MF
Dimensions
Height (mm)
333
377
333
377
Width (mm)
427
624
427
624
Depth (mm)
266
325
266
325
Weight
Dry (Kg)
6,2
10,5
7,8
12,5
Capacity
Volume (L)
30
60
30
60
Pump
Flow rate (L/h)
160-300
210-440
80-250
140-350
Power (W)
4,5
4,7
4
5
Lighting
Rated input (W)
3,1
5,5
3,1
5,5
Lumen (lm)
309
522
309
522
Kelvin (K)
6340
6122
6340
6122
III. UNPACKING AND PRELIMINARY CHECKS
a. Open the packaging.
b. Take out the aquarium, handling it with care;
c. Place the aquarium on a smooth flat surface;
d. Dispose of the packaging materials in compliance with current regulations in the country of disposal;
The NEWA Mirabello young aquarium has been packaged so that it can withstand normal knocks and pressures during transport.
However, excessive knocks or incorrect handling may cause damage to the aquarium therefore we recommend you follow these
warnings in order to check that the tank is watertight:
• Place the tank on a dry horizontal surface, on a layer of fabric sheeting or sheets of newspaper.
• Fill the tank with water and carefully check each side. Check that there are no leaks by wiping along the outer edges of the glass
panel couplings with a dry cloth (Fig. 3).
• If there are leaks, take the aquarium to the dealer so that it can be carefully checked or replaced.
WARNING: do not empty the aquarium by lifting or tilting it, as it may break! (Fig. 4).