Installing your
Built-in
Hob
Bringing it all together
Installing your Built-in Hob
14
If you require any technical guidance or find t at your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
section of these instructions,
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
ance must
WARNING: This appli
be installed by an
authorised service person or qualified technician,
according to the instructions in this guide and in
compliance with the current local regulations.
•
Incorrect installation may cause harm and damage, for
which the manufacturer accepts no responsibility and
the warranty will not be valid.
•
Prior to installation, ensure that the local distribution
conditions (electricity voltage and frequency and/or
nature of the gas and gas pressure) and the
adjustments of the appliance are compatible. The
adjustment conditions for this appliance are stated on
the label.
The laws, ordinances, directives and standards in force in
the country of use are to be followed (safety regulations,
proper recycling in accordance with the regulations, etc.).
Instructions for the installer
General instructions
•
After removing the packaging material from the appliance
and its accessories, ensure that the appliance is not
damaged. If you suspect any damage, do not use it
and contact an authorised service person or
qualified technician immediately.
•
Make sure that there are no flammable or combustible
materials in the close vicinity, such as curtains, oil,
cloth etc. which may catch fire.
•
The worktop and furniture surrounding the appliance
must be made of materials resistant to temperatures
above 100°C.
•
If a cooker hood or cupboard is to be installed above the
appliance, the safety distance between cooktop and any
cupboard/cooker hood should be as shown below.
HOB
Minimum
42 cm
Minimum
42 cm
Minimum 65 cm (with hood)
Minimum 70 cm (without
hood)
•
The appliance should not be installed directly above a
dishwasher, fridge, freezer, washing machine or
clothes dryer.
•
If the base of the appliance is accessible by hand, a barrier
made from a suitable material must be fitted below
the base of the appliance, ensuring that there is no
access to the base of the appliance.
•
If the hob is installed above an oven, the oven
should have a cooling fan.
•
The cut aperture dimensions is indicated in the figure.
Summary of Contents for NWSP60W-B-X
