Assembly & Care Guide
Ware Table Lamp
[email protected] Frederiksgade 1, Ground Floor, 1265 København DK www.newworks.dk
Read the instruction carefully and turn off electricity at main circuit breaker panel before beginning the installation.
Warning all wires are connected - when unpacking the box, be careful not to pull wires, as this may result in a
bad connection. Do not connect the electricity until the lamp is fully assembled. Unpack and place all parts on a
levelled and stable surface.
ASSEMBLY INSTRUCTIONS
1. Place the lamp Base (A) on a flat surface.
2. Take of the front shell and install light bulb (B) (Not included)
3. Place the front shell back on again (C)
4. Connect to electricity outlet
Note: The lamp has a three-step touch dimmer placed on the backside of the lamp.
(A)
(B)
(C)