![NEW TABLE CONCEPT VENGIO User Manual Download Page 6](http://html1.mh-extra.com/html/new-table-concept/vengio/vengio_user-manual_1678229006.webp)
UME-TVG03-12/19
www.newtableconcept.com
Page 6
6. PREPARE VENGIO’ FOR WALL MOUNTING
The table is shipped assembled and, to mount it on the wall, it is necessary to partially disassemble it.
Figure 12 shows the table parts that will be referenced later on this manual.
Fig 12
A -
mounting plate
B -
springs cover
C -
springs compartment
D -
table frame
E -
mounting plate cover
F -
table top
G -
legs module
1. Place the Vengiò table on a bench and remove the packing material.
2. Unscrew the two M6 cylindrical screws (Fig. 13) and remove the
legs module
(Fig. 14).
Fig. 13
Fig. 14
3. Unscrew the two M6 conical head screws that fix the
table top
to the
table frame
. Remove the
table
top
(Fig. 15) and place it on the ground using the foam rubber protection (Fig. 16).
Fig. 15
Fig. 16
4. The
table frame
is now ready for installation.