© New Scale Technologies, Inc. MPM System Manual, June 9, 2017
P a g e
|
12
MPM-4 DOF Arm-Upright continued… Using MPM-Ring-72-Deg
After installing the
MPM-Ring-72-Deg
section(s), slide the dovetail of the
MPM-4 DOF Arm-Upright
onto
the top of the ring(s). Move the dovetail to the desired polar angle and secure in place by tightening the
thumb screw at the base of the assembly. Use the 5/32 hex wrench to tighten the thumb screw as
needed.
