MX Series Voice Gateway User Manual
New Rock Technologies, Inc.
43
Table 2-10 MGCP Configuration Parameters
Name
Description
Local port
Configure the UDP port for transmitting and receiving MGCP messages, the default
value is 2427.
Note: The signaling port number can be set in the range of 1-9999, but cannot conflict
with the other port numbers used by the equipment.
Proxy server
Configure the IP address and port number of MGCP proxy server, separated by “:”. It
has no default value.
The address can be set to an IP address or a domain name according to the subscribers’
requirements. When a domain name is used, it is required to configure DNS server on
the "
Basic
>
Network
" page. Examples of complete and effective configuration:
46.33.136.50:2727
or
www.proxy.com: 2727
.
User agent domain name
The domain name associated with the call agent, it has no default value. DNS server is
required to set.
Example: www.gatewaymgcp.com.
Default event package
List all the types of default event packages supported by the HX4. Multiple package
names are separated by“,”.
The default value is L, D, G
L: Line Package
D: DTMF Package
G: Generic Media Package
Persistent line event
List the event types that the gateway can report, with multiple types separated by “,”.
When gateways process the events listed here, they will report to the call agent.
Note: This parameter must be set since there is no default value. The factory setting is
L/HD, L/HU:
L/HD: Offhook
L/HU: Onhook
FXO event package
Handset Package or Line Package
Wildcard
Select whether a wildcard with prefix is allowed when a gateway registers to the proxy
server. The default value is “Not allowed”
.
Partially allowed: gateways will use a wildcard with fixed prefix (e.g. aaln / *) when
registering. For example, when configuring telephone numbers, if line 1 is set to aaln/1,
line 2 is set to aaln/2 and line 3 is set to aaln/3, the gateways will register to the call
agent in aaln/* without the need of registering the lines individually.
Allowed: the gateways will use a wildcard in registering without prefix.
CR for End-of-Line
Select whether CR is used as the end of line in the MGCP messages. Default not
selected.
Quarantine default to loop
Select the Quarantine handle of gateways making a request to the outside. Default not
selected.
Selected: quarantine using loop mode, the gateways will continually notify all events as
requested after receiving a request.
Enable first digit timer
Select the processing mode when there is no timeout parameter in the outside request
received by the gateways. Default not selected.
Selected: the gateways will report timeout in terms of its own timeout setting (the time
interval set in non-dial timeout of configuration system parameters) when subscribers
has not dialed up in time after offhook.
Using configured digit map
Select whether to activate the digit map configured by local gateway. Default not
selected.
