NEW6210
3
NEW POS Technology limited
Product manual
Push the back cover
Plug cable
Pull out the battery
Lift the battery
1. Install the Battery
* Remove the back cover of the device;
* Connect the cable of the battery and put the battery to its place .
Installation Guidance
2. Remove the Battery
* Open the back cover . Remove the back cover of the device;
*
Push the battery brace and lift the battery gently;
*
Remove the battery.
TF
SI
M
NEW6210
4
NEW POS Technology limited
Product manual
3. Install the SIM/UIM card
* Remove the back cover of device;
*
Insert the card into the SIM/UIM card slot .
4. Remove the SIM
/UIM
card
* Remove the back cover of device;
* Draw the SIM/UIM card out the slot.
Note
Do
not
paste
any
lable
on
the
SIM
/
SAM
card
,
or
the
card
with
lable
can
not
be
inserted
smoothly
.
Make sure that the device is in power off status when installing or removing
SIM/UIM card.
5. Switch the device on
* Press the power key" ". Hold the power key for more than two seconds, then
the buzzer of device beeps and the back light is switched on to show device
boots successfully and LCD shows the corresponding program launch menu;
6.
* Press the power key" " ,and hold the key for more than two seconds. The
device will be switched off successfully.
* Force shutdown During terminal halt, press the power key for about eight
seconds and the terminal will be shutdown .
Switch the device off
Install SIM/UIM card
Note
Please pull the battery cable forward out of the connector as the figure
shows, or it may damage the connector.
