New Holland WORKMASTER 35, Operator'S Manual

Page: 70 / 180

4 - OPERATING INSTRUCTIONS
Power take-off (PTO) operation
Rear PTO
1. To engage the PTO, push the PTO switch (1) down
and turn the switch to the "ON" position (2) .
NOTE: When the PTO is engaged the PTO indicator
light will be illuminated on the instrument panel.
2. The PTO system is totally independent of the tractor
ground speed, and the following operations can be
performed.
• The tractor ground travel can be stopped without stop-
ping the PTO.
• Stop the PTO by disengaging the PTO clutch without
stopping the tractor ground travel.
3. To disengage the PTO, push down on the PTO switch
and the switch will automatically return to the "OFF" posi-
tion
(3) .
NHIL12CT00670AA
1
Mid PTO (Optional)
1. To engage the mid PTO, pull up on the mid PTO lever
(1) push down on the PTO switch and turn the switch
to the "ON" position.
NOTE: When the mid PTO is engaged the rear PTO
will also be engaged. The mid PTO cannot be en-
gaged separately.
2. To disengage the mid PTO, push the mid PTO lever
(1) down to the "OFF" position and , push down on the
PTO switch and the switch will automatically return to
the "OFF" position.
NOTE: To start the engine the mid PTO lever must be
in the down (disengaged) position and the PTO switch
in the "OFF" position.
NHIL12CT00772AA
2
4-2