7 - MAINTENANCE
Headlight - Replace
If head lamps, fail to operate, the bulb must be replaced.
To change the bulb:
1. Open the tractor hood.
2. Disconnect wire harness connector
(1)
from the head-
light bulb.
3. Remove rubber boot
(2)
to reveal headlight retainer.
4. Release the two tabs that retain the bulb to the housing.
5. Remove the bulb from the housing. .
6. Place a new bulb in the housing, then reinstall the re-
tainer in the housing.
NOTICE:
Be careful not to touch the bulb with bare fingers.
Oil from the fingers can shorten the life of bulb. Use pro-
tective cloth or glove when installing bulb.
NOTE:
Replacement bulbs are dual
55/60 W
filament halo-
gen : (H4 U 37R).
NHIL12CT00834AA
1
7. Reinstall rubber boot and wire harness connector.
7-49
Summary of Contents for Workmaster 25 Tier 4B
