background image

SECTION 00 - INTRODUCTION

11

2.10 WASTE DISPOSAL

Improperly disposing of waste can threaten the envi-
ronment.
Each country has its own Regulations on this sub-
ject. It is therefore advisable to prepare suitable con-
tainers to collect and store momentarily all solid and
fluid materials that must not be scattered in the envi-
ronment to avoid pollution.
At preset intervals these products will be delivered to
disposal stations legally recognized and present in
this Country.
Hereunder are listed some products of the machine
requiring disposal:

Z

lubricating oil;

Z

brake system oil;

Z

coolant mixture, condensation rests and pure anti-
freeze;

Z

fuel;

Z

oil and fuel filter elements;

Z

air filter elements;

Z

battery.

Also polluting rags, paper, sawdust and gloves must
be disposed in compliance with the same proce-
dures.
Do not use food or beverage containers that may
mislead someone into drinking from them. Do not
pour waste onto the ground, down a drain, or into
any water source. Air conditioning refrigerants es-
caping into the air can damage the Earth’s atmos-
phere. Government regulations may require a
certified air conditioning service centre to recover
and recycle used air conditioning refrigerants. Ob-
tain information on the proper way to recycle or dis-
pose of waste from your local environmental or
recycling centre, or from your Dealer.

Summary of Contents for W50BTC
































Reviews: