New Holland W270C Tier 4, Service Manual

Page: 11 / 61

INTRODUCTION
Metric hardware
Use the following torques when specifications are not given.
These values apply to fasteners with coarse threads as received from supplier, plated or unplated, or when lubricated
with engine oil. These values do not apply if graphite or Molydisulfide grease or oil is used.
Grade 8.8 Bolts, Nuts and Studs
M4
3 - 4 N·m ( 27 - 35 lb in )
M5 7 - 8 N·m ( 62 - 71 lb in )
M6 11 - 12 N·m ( 97 - 106 lb in )
M8
26 - 31 N·m ( 230 - 274 lb in )
M10 52 - 61 N·m ( 460 - 540 lb in )
M12 90 - 107 N·m ( 66 - 79 lb ft )
M14 144 - 172 N·m ( 106 - 127 lb ft )
M16
217 - 271 N·m ( 160 - 200 lb ft )
M20 434 - 515 N·m ( 320 - 380 lb ft )
M24 675 - 815 N·m ( 498 - 601 lb ft )
M30
1250 - 1500 N·m ( 922 - 1106 lb ft )
M36
2175 - 2600 N·m ( 1604 - 1918 lb ft )
Grade 10.9 Bolts, Nuts, and Studs
M4 4 - 5 N·m ( 35 - 44 lb in )
M5 9 - 11 N·m ( 80 - 97 lb in )
M6
15 - 18 N·m ( 133 - 159 lb in )
M8 37 - 43 N·m ( 327 - 381 lb in )
M10 73 - 87 N·m ( 54 - 64 lb ft )
M12 125 - 150 N·m ( 92 - 111 lb ft )
M14
200 - 245 N·m ( 148 - 181 lb ft )
M16 310 - 380 N·m ( 229 - 280 lb ft )
M20 610 - 730 N·m ( 450 - 538 lb ft )
M24
1050 - 1275 N·m ( 774 - 940 lb ft )
M30 2000 - 2400 N·m ( 1475 - 1770 lb ft )
M36 3500 - 4200 N·m ( 2581 - 3098 lb ft )
84547255C 15/03/2013
6