Engine - Engine and crankcase
12. Place a solid steel bar or pipe through the strap loop
inside the engine hood and attach the strap to a suit-
able lifting device.
Raise the engine hood with the strap to release ten-
sion on the lifting motor.
RAPH12WEL0600AA
12
13. Tag and disconnect the connector
(1)
of the rearview
camera wire harness
(3)
. Cut the wire ties
(2)
that hold
the rearview camera wire harness
(3)
to the rear grill.
LEIL17WHL1268AB
13
14. Cut the wire ties and remove the rearview camera wire
harness from the engine hood. Place the rearview
camera wire harness off to the side in a safe location.
LEIL13WHL0140AB
14
15. Remove the engine hood wire harness clamp
(1)
from
the cooler housing.
Tag and remove the engine hood ground wire
(2)
from
cooler housing.
LEIL13WHL0149AB
15
48144035_EN 03/07/2017
10.1 [10.001] / 8