New Holland TD65F, Service Manual

Page: 36 / 41

Engine - Engine and crankcase
Engine - General specification
TD65F LA
TD75F LA
TD85F LA
Engine - Torque
TD65F LA
TD75F LA
TD85F LA
Angular tightening torque
Part to tighten Turnbuckle Tightening torque Angle
Head fixing bolts (2) , Engine - Sectional view
(10.001)
M12 x 1.25
70 N·m ( 51.63 lb ft )
130 ± 5 ° + 140 ±
5 °
Main journal fixing bolts (4) , Engine - Sectional view
(10.001) of the crankshaft
M14 x 1.5 80 N·m ( 59.00 lb ft ) 90 °
Connecting rod journal bolts (5) , Engine - Sectional
view (10.001)
M11 x 1.25
40 N·m ( 29.50 lb ft )
60 °
Engine flywheel fixing bolts (3) , Engine - Sectional
view (10.001)
M12 x 1.25 40 N·m ( 29.50 lb ft ) 60 °
Tightening torques
Parts Turnbuckle Torque value
Fixing bolts of the rocker shaft supports M8 X 1.25 25 N·m ( 18.44 lb ft )
Hub fixing nut on the crankshaft
M30 x 1.5
300 N·m ( 221.3 lb ft )
Fan and alternator drive pulley fixing bolts (6) ,
Engine - Sectional view (10.001)
M12 x 1.25
49 N·m ( 36.1 lb ft )
Dynamic balancer fixing bolts for the
four-cylinder models
M12 x 1.25 110 N·m ( 81.13 lb ft )
Intake manifold fixing bolts M8 X 1.25 25 N·m ( 18.44 lb ft )
Alternator and belt tensioner fixing nut M12 x 1.25 55 N·m ( 40.57 lb ft )
Water pump to engine fixing bolts
M10 X 1.25
55 N·m ( 40.57 lb ft )
Nuts for injector fixing stud
M8 X 1.25
25 N·m ( 18.44 lb ft )(*)
Valve cover fixing nuts M8 X 1.25 15 N·m ( 11.06 lb ft )
Fixing bolts of the rocker shaft supports M8 X 1.25 25 N·m ( 18.44 lb ft )
Oil pump and respective cover fixing bolts
M8 X 1.25
25 N·m ( 18.44 lb ft )
Distribution box and cover fixing bolts M8 X 1.25 25 N·m ( 18.44 lb ft )
Flanged intermediate pin fixing bolts M10 X 1.25 55 N·m ( 40.57 lb ft )
Control shaft retaining plate bolts M8 X 1.25 35 N·m ( 25.81 lb ft )
Nuts for valve play adjustment bolts
M8 x 1
22 N·m ( 16.23 lb ft )
Exhaust manifold fixing bolts M8 X 1.25 25 N·m ( 18.44 lb ft )
Injection pump fixing bolts M8 X 1.25 25 N·m ( 18.44 lb ft )
Engine sump fixing bolts to:
Front and rear distribution cover
M10 X 1.25
39 - 49 N·m ( 28.76 - 36.14 lb ft )
Engine flywheel and cylinder block cover: M10 X 1.25 49 - 59 N·m ( 36.14 - 43.52 lb ft )
(*) Tighten the nuts in two phases
84574094A 19/10/2016
10.1 [10.001] / 3