New Holland T8010, Service Manual

Page: 9 / 81

INTRODUCTION
WARNING
Hydraulic fluid escaping under pressure can have enough force to penetrate the skin. Hydraulic fluid may
also infect a minor cut or opening in the skin. If injured by escaping fluid, see a doctor at once. Serious
infection or reaction can result if medical treatment is not given immediately. Make sure all connections are
tight and that hoses and lines are in good condition before applying pressure to the system. Relieve all
pressure before disconnecting the lines or performing other work on the hydraulic system. To find a leak
under pressure use a small piece of cardboard or wood. Never use hands. Failure to comply could result in
death or serious injury.
M252A
WARNING
When removing hardened pins such as a pivot pin, or a hardened shaft, use a soft head (brass or bronze)
hammer or use a driver made from brass or bronze and a steel head hammer.
M497
WARNING
When using a hammer to remove and install pivot pins or separate parts using compressed air or using a
grinder, wear eye protection that completely encloses the eyes (approved goggles or other approved eye
protectors).
M498
WARNING
Use suitable floor (service) jacks or chain hoist to raise wheels or tracks off the floor. Always block machine
in placed with suitable safety stands.
M499
WARNING
When servicing or repairing the machine. Keep the shop floor and operators compartment and steps free of
oil, water, grease, tools, etc. Use an oil absorbing material and or shop cloths as required. Use safe practices
at all times.
M500
WARNING
Batteries contain acid and explosive gas. Explosions can result from sparks, flames or wrong cable con-
nections. To connect the jumper cables correctly to the battery of this machine see the Operators Manual.
Failure to follow these instructions can cause serious injury or death.
M504
84318454 14/03/2010
4
Find manuals at https://best-manuals.com