New Holland T4020V, Service Manual

Page: 44 / 61

Clutch - Clutch mechanical release control
Clutch mechanical release control - Remove
Prior operation:
A. Disconnect the battery negative prong.
B. Remove the front left-hand panel.
1. Partially disconnect the fuse holder box (1) and the di-
agnosis socket (2) .
MOIL16TR01988AA
1
2. Correctly disconnect the electrical connector (1) from
the engine starting inhibitor switch (2) .
3. Loosen the two indicated connection screws of the
switch (2) and the relevant washers.
4. Store the switch (2) in a suitable location.
MOIL16TR01989AA
2
5. Disconnect the retaining clip (1) of the clutch (3) control
lever cable (2) under the dashboard on the right-hand
side of the vehicle.
MOIL16TR01344AA
3
47888351 03/08/2016
18.1 [18.100] / 3