New Holland SD440A, Repair Manual

Page: 30 / 31

SECTION 1 - GENERAL INFORMATION
page 1-24
OTHER SPECIFICATIONS
Spacing Configurations
4-Row
3-Row
18.3, 25.4, or 30.5 cm (7.2, 10, or 12 inch) spacings
25.4 or 30.5 cm (10 or 12 inch) spacings
Frame/Ground
Clearance
71.1 to 81.3 cm (28 to 32 inches) depending on openers
Cultivator-Style Trips 160 kg (350 lb) with 2.2 X 5.1 cm (7/8 X 2") shank, 4.4 cm (1 3/4") centers fit
47 degree sweeps
160 kg (350 lb) with 2.2 X 5.1 cm (7/8 X 2") shank, 5.7 cm (2 1/4") centers fit
50 degree sweeps
250 kg (550 lb) with 2.5 X 5.1 cm (1 X 2") shank, 4.8 cm (1 7/8") centers fit
47 degree sweeps
250 kg (550 lb) with 2.5 X 5.1 cm (1 X 2") shank, 5.7 cm (2 1/4") centers fit
50 degree sweeps
Adjustable Floating
Hoe-Style Shank/Opener
1.9 X 5.1 cm (3/4 X 2") edge-on shank at bottom
special openers required
four pressure settings, ranging from 27.2 to 104.3 kg (60 to 230 lb)
5.7 cm (2 1/4") hole centers
Press Wheels
Steel 8.9 X 55.9 cm (3 1/2 X 22")
11.4 X 55.9 cm (4 1/2 X 22")
Rubber 7.6 X 55.9 cm (3 X 22")
10.2 X 55.9 cm (4 X 22")
14 X 55.9 cm (5 1/2 X 22")
Options
shim kits to lower shanks behind tractor wheels.
single or dual endmarkers
press wheel mud scrapers
tow hitch for NH
3
cart
bolt-on caps for steel press wheels
2-bar harrow for 3-row configuration
1-bar harrow for 4-row configuration
dual offset caster for the center section of 8.2 and 10.1 m (27 and 33 ft)
models
dual offset caster for the wing section (all models)