SECTION 1 - GENERAL INFORMATION
1-8
HYDROSTATIC TRANSAXLES
.
GENERAL SPECIFICATIONS
Lubrication
SAE 20W-50 API Classification SH/CD
Oil Capacity
1.6 to 1.7 qt. (1.5 to 1.6 liters)
Oil Level
The transaxle is a sealed system and does not requre periodic checking. Check oil at
the oil fill plug location only. Do not check the oil at the vent tube. Checking oil at the
vent tube will only give you a false reading or no reading at all, since this is the oil
expansion area. If the oil needs to be checked, the transaxle must be removed to check
oil level and IT CAN BE ONLY CHECKED COLD. There is a fill plug located at the top
of the transaxle. To check the level of the oil, remove the fill plug. Oil level should be 3/
4” (1.9 cm) from the top of the oil fill plug.
Fluid Change
The transaxle is factory filled and does not require regular oil changes.
Ground Speed
Forward
0.6.0 MPH (9.7 km/h)
Reverse
0-3.0 MPH (0-5.0 km/h)
Find manuals at https://best-manuals.com
