New Holland F4CE9484, Service Manual, Page: 14 / 41

INTRODUCTION
Component Size Specification
Feed Pump M8 Studs 10 - 14 Nm ( 7.4 - 10.3 lb ft )
High Pressure Pump Gear M18 Nut 100 - 110 Nm ( 73.8 - 81.1 lb ft )
Fuel Pump M8 Nut
20 - 28 Nm ( 14.8 - 20.7 lb ft )
Injector
First Phase M6 Screw 8.15 - 8.85 Nm ( 6.0 - 6.5 lb ft )
Second Phase M6 Screw 70 - 80 °
Injector Feed Connector 45 - 55 Nm ( 33.2 - 40.6 lb ft )
Common Rail M8 Screw 20 - 28 Nm ( 14.8 - 20.7 lb ft )
High Pressure Fuel Line M14 Fitting 18 - 22 Nm ( 13.3 - 16.2 lb ft )
High Pressure Pipe Connector M8 Screw 20 - 28 Nm ( 14.8 - 20.7 lb ft )
Fuel Filter Bracket M12 Screw 71 - 85 Nm ( 52.4 - 62.7 lb ft )
Fuel Filter Holder M8 Screw 20 - 28 Nm ( 14.8 - 20.7 lb ft )
Fuel Filter C ¾ Turn
Cooling System and Components
Engine Coolant Inlet M10 Screw 37 - 49 Nm ( 27.3 - 36.1 lb ft )
Fitting on Coolant Inlet 90 ° Elbow 20 - 28 Nm ( 14.8 - 20.7 lb ft )
Compressor Cooling Pipe 20 - 24 Nm ( 14.8 - 17.7 lb ft )
Engine Coolant Drain Collector M6 Screw 8 - 12 Nm ( 5.9 - 8.9 lb ft )
Water Pump M8 Screw 20 - 28 Nm ( 14.8 - 20.7 lb ft )
Belt Tensioner M10 37 - 49 Nm ( 27.3 - 36.1 lb ft )
Idler Pulleys M10 37 - 49 Nm ( 27.3 - 36.1 lb ft )
47597675 27/09/2013
8