02
–1–12
8. MACHINE LIFTING PROCEDURE
LIFTING PROCEDURES FOR THE MACHINE
COMPLETE
Carry out the lifting work on a level ground.
[1] Manipulate each operating lever to take the
machine to a position as shown in the figure.
[2] Operate the boom swing lever to face the boom
directly in front, and raise the dozer blade.
[3] Stop the engine, and set the safety lock lever to
“LOCKED” position. Then get off the machine after
ensuring for no abnormalities around the
operator’s seat.
[4] Install shackles to both bores (C) provided at both
ends of the dozer blade, and put the wire ropes
on them.
[5] Put the wire ropes on the (D) portion of the boom.
[6] If any portions of the wire ropes directly touch the
machine when the wire ropes are lifted, protect
the machine from damage by means of applying
a wooden piece or rag between them.
[7] Slightly lift the machine to confirm the balance,
then lift up the machine.
• The wire ropes to be used for lifting the ma-
chine should have sufficient strength against
the machine weight.
• Improper lifting method and/or rope rigging
manner might cause for a movement or slip
of the machine while it is being lifted, result-
ing serious injury or damages to the machine.
• Do not impose a load suddenly on the wire
ropes and slings.
• When the lifting work is carried out in coopera-
tion with multiple persons, make sure to check
every situation by exchanging signals with each
other.
• During the lifting work, keep any persons away
from the lifted machine, especially under the
machine
Note : This figure is calculated with Japanese
standard bucket.
Bucket weight : 100 kg (220 lb)
MACHINE MODEL
WEIGHT
4,060 kg (8,950 lb)
4,630 kg (10,210 lb)
SK40SR
-2
SK45SR
-2
ITEM
SIZE
Ø 1˝ X 2,700 mm
Ø 1˝ X 5,100 mm
Q'TY
1
2
CABLE (A)
CABLE (B)
ITEM
SIZE
Ø 1˝ X 2,600 mm
Ø 1˝ X 5,100 mm
Q'TY
1
2
CABLE (A)
CABLE (B)
•
SK40SR-
2
•
SK45SR-
2
Model SK40SR-
2
Weight : 4,060 kg (8,950 lb)
19.4
°
(15.0
°
)
17.0
°
(16.4
°
)
5,500 (18´1˝)
(D)
(A)
(B)
(C)
CAB
LINE