New Holland E175C, Service Manual

Page: 16 / 51

INTRODUCTION
Cleaning
Clean the exterior of all components before carrying out
any form of repair. Dirt and dust can reduce the efficient
working life of a component and lead to costly replace-
ment.
Solvents should be checked that they are suitable for the
cleaning of components and also that they do not risk the
personal safety of the user.
Dirt from oil or grease and scattered tools or faulty pieces
are dangerous for persons, because they can generate
slipping or falls.
For the machine cleaning, use a jet of warm water or
steam under pressure and commercial detergents. Never
use fuel, petroleum or solvents, because the first ones
leave an oily layer that favours the sticking of dust, while
solvents (even if weak) damage the paint and favour the
formation of rust.
Never use water jets or steam on sensors, connectors or
other electric components.
Prevent that the water jet penetrates inside the cab.
TULI12WEX2021AA
18
47494131A 11/03/2013
11