New Holland CR9090 Tier 4a, Service Manual

Page: 45 / 81

Engine - Engine and crankcase
Engine - Remove
CR Series Tier IV NA
CX8000 Elevation series NA
NOTE: The engine and cooling system used in the combine is designed to be removed as a modular unit. The follow-
ing engine removal procedure demonstrates the removal of the engine only from the module. This procedure takes
into consideration the possible unavailability of proper, or sufficient lifting equipment for complete module removal.
When possible, remove the engine and cooling system module as designed.
1. Remove the gearbox and hydraulic pumps from the en-
gine. (Refer to Main gearbox and drive - Remove
(14.100) )
Place a suitable container (1) below the coolant drain
hose (2) .
NOTE: Depending on model, the cooling system has a
coolant capacity between 50 - 60 l ( 13.2 - 15.9 US gal ). Be
sure to use clean containers with adequate capacity when
draining the cooling system.
10013105_780
1
2. Refer to Expansion tank - Remove (10.400) for the
coolant fluid drain and removal of the engine coolant
reservoir.
NOTE: Depending on the model, the combine engine has an oil capacity between 29 - 35 l ( 7.7 - 9.2 US gal ). Be
sure to use clean containers with adequate capacity when draining the engine oil.
3. Remove the cap (1) and turn the engine oil drain valve
(2) , to the open position. Drain all of the engine oil into
suitable containers.
10013107
2
4. Loosen and remove the mounting hardware from the
protection cover (1) .
Remove the cover (1) from the engine compartment.
ZEIL09CR0245A0B
3
47695751 27/03/2014
10.1 [10.001] / 3