2
All Rights Reserved
Printed in the USA
2000 by New Holland Inc.
Contents
Page
Introduction
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assembly
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Loose Parts
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assembling the Blade
4
. . . . . . . . . . . . . . . . . . . . .
Setting Up the Tractor
4
. . . . . . . . . . . . . . . . . . . . .
Installing the Blade
5
. . . . . . . . . . . . . . . . . . . . . . .
Removing the Blade
8
. . . . . . . . . . . . . . . . . . . . . . .
Operation
9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Raising and Lowering the Blade
9
. . . . . . . . . . . . .
Adjusting Dial-A-Height
10
. . . . . . . . . . . . . . . . . . .
Adjusting the Blade Angle
10
. . . . . . . . . . . . . . . . . .
Adjusting the Blade Trip Springs
10
. . . . . . . . . . . .
Tips for Using the Blade
11
. . . . . . . . . . . . . . . . . . .
Maintenance
11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended Maintenance Schedule
11
. . . . . . . .
Greasing and Lubrication
11
. . . . . . . . . . . . . . . . . . .
Reversing the Scraper Blade
12
. . . . . . . . . . . . . . . .
Storage
12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction
Thank you for purchasing a New Holland product.
All of us at New Holland want you to be completely
satisfied with your new product, so feel free to contact
your local Authorized Service Dealer for help with
service, genuine replacement parts, or other information
you may require.
Whenever you contact your Authorized Service Dealer or
the factory, always know the model and serial numbers of
your product. These numbers will help the Service Dealer
or Service Representative provide exact information about
your specific product. You will find the model and serial
number plate at the location shown in Figure 1.
1
m–1237
Figure 1
1.
Model and serial number plate
For your convenience, write the product model and serial
numbers in the space below.
Model No:
Serial No.
Read this manual carefully to learn how to operate and
maintain your product correctly. Reading this manual will
help you and others avoid personal injury and damage to
the product. Although we design, produce and market
safe, state-of-the-art products, you are responsible for
using the product properly and safely. You are also
responsible for training persons, who you allow to use the
product, about safe operation.
The warning system in this manual identifies potential
hazards and has special safety messages that help you and
others avoid personal injury, even death. Danger,
Warning, and Caution are signal words used to identify
the level of hazard. However, regardless of the hazard, be
extremely careful.
Danger signals an extreme hazard that will cause serious
injury or death if the recommended precautions are not
followed.
Warning signals a hazard that may cause serious injury or
death if the recommended precautions are not followed.
Caution signals a hazard that may cause minor or
moderate injury if the recommended precautions are not
followed.
Two other words are also used to highlight information.
Important calls attention to special mechanical
information, and Note emphasizes general information
worthy of special attention.
Determine the left and right side of the machine from the
normal operating position.
