1-1
1
Preparing for installation
H3C MSR1000 router series includes the models in
Table1-1 H3C MSR1000 router series models
Identifier (marked on the front panel)
Product code
H3C MSR1000 Series
RT-MSR1008
RT-MSR1004S-5G
RT-MSR1004S-5G-GL
RT-MSR1104S-W
RT-MSR1104S-W-CAT6
NOTE:
Installation of the router is subject to the actual environment.
Safety recommendations
To avoid any equipment damage or bodily injury, read the following safety recommendations before
installation. Note that the recommendations do not cover every possible hazardous condition.
Safety symbols
When reading this document, note the following symbols:
WARNING
means an alert that calls attention to important information that if not understood or
followed can result in personal injury.
CAUTION
means an alert that calls attention to important information that if not understood or
followed can result in data loss, data corruption, or damage to hardware or software.
General safety recommendations
•
Keep the router and installation tools away from walk areas.
•
Place the router in a dry and flat location and make sure anti-slip measures are in place.
•
Remove all external interface cables and power cords before moving the router.
Electricity safety
•
Locate the power switch of the power source before installation. Shut off the power
immediately if an accident occurs.
•
Make sure the router is reliably grounded.
•
Connect the interface cables correctly.
•
Use an uninterrupted power supply (UPS).
