8-1
8
FAQ
iFIST becomes unavailable after HDM is reset. How do I resolve the issue?
As a best practice, do not reset HDM while you are using iFIST. If you did so, reboot the server and
then restart iFIST.
A logical drive is displayed with a garbled name in iFIST. How do I resolve the issue?
Delete the logical drive with the garbled name, and then create a new logical drive as needed.
When upgrading iFIST on a server that uses a USB flash drive as the boot device, iFIST got
stuck on the GRUB page. How do I resolve the issue?
Remove the USB flash drive that contains the startup configuration file from the server, and then
restart the iFIST upgrade process.
As a best practice, do not mount the ISO image and install a USB flash drive as the boot device at
the same time.
The iFIST OS installation wizard cannot detect the USB partition that does not have a UUID.
How do I resolve the issue?
Reformat the USB partition or replace the USB flash drive with a new one.
iFIST cannot install the operating system on a RAID array created on the onboard RAID
controller. Why?
The OS installation cannot be completed because iFIST cannot identify the drive letter of the RAID
array created on the onboard RAID controller.
When installing the operating system, I choose to import configuration parameters from a
file stored on a USB flash device. However, after waiting for a long time, the browser displays
an unresponsive script warning message. How do I resolve the issue?
This symptom might occur if the USB flash drive used for the import contains a lot of files. As a result,
the system to display an unresponsive script warning message when loading pages. Just click
Continue
to proceed.
As a best practice to improve user experience, avoid using a USB flash drive that contains a large
number of files for configuration import to iFIST.
