After turning on the keyswitch, allow the system a minimum of 20 minutes to reach a stable
temperature before performing any critical work.
7.
Double-click the TA-7600 Controller.exe file or the shortcut you created.
8.
The following screen will appear.
9.
Note that if you have not yet turned on your seed laser, or if it is operating at insufficient
power, the warning button will appear at the bottom of the GUI main screen (as shown).
This does not indicate that there is necessarily a problem, only that there is insufficient or
no seed power. By clicking on the warning button, you can see the following message
indicating that the amplifier chip has been protected from “free running.”
- 9 -
