Adjustment of Door Hinges
Use the front screw for left or right adjustment.
Loosen two bracket screws to slide door up or down. Tighten screws.
Use the back screw for in or out adjustment.
To remove door (if required) pull the clip at the back of each hinge.
Phone
(02) 6773 8595 |
Web
www.newenglandjoinery.com.au
Removing the Drawer
clic k
1.
Open drawer to full extension.
2.
Grasp the underside of the drawer front and lift drawer off the runner.
3.
To replace, place drawer back on runner and push fully closed. You will
hear a click as the drawer is secured.
Removing the Drawer Fronts
1.
Open drawer to full
extension.
2.
Using index fingers push back
metal tabs.
3.
Gently pull drawer front away
from drawer.
4.
To replace, clip angled
brackets into bottom of
mechanism and push drawer
front back on securely, using
downward motion.
(On any drawer over 750mm, tighten
the cam-lock screws under the
drawer base.)
(On any drawer over 750mm, loosen
the cam-lock screws using a quarter
turn under the drawer base.)
