The Burbank Potting Bench
3
4
2
STEP T WO
To assemble the lattice, first insert the vertical
trellis
slats (5) into
the three middle rails as shown aside.
Excessive
force should not be
needed.
Insert the component from the previous step onto the top and
bottom rail as shown.
Note the routed hole offset on the bottom rail. Make sure the
holes are closer towards the back (flat part of the top rail).
Insert the left and right trellis posts as shown.
Note the tabs at the end of the rails. Once inserted, the tabs
will lock the assembly into place.
1
The Burbank Potting Bench
1
2
3
