manualshive.com logo in svg

New England Arbors White Raised Planter, Assembly Instructions, Page: 3 / 4

Share
Download
New England Arbors White Raised Planter Assembly Instructions Download Page 3

The 24”x36” White Raised Planter

7

3

6

S T E P  O N E   ( C O N T ’ D )

Fasten the wall panels together using 4 of the 5/8” screws provided

through the pre-drilled holes on the posts as shown.

Fasten the corner brackets to the posts using 8 of the 1 1/2”screws

provided through the pre-drilled holes on the brackets as shown. 

5

www.newenglandarbors.com

S T E P  T W O

5

6

The 24”x36” White Raised Planter

Insert the floor support rail into the front and rear walls as shown.

Note

 the notch at the ends of the floor support rail.

7

Summary of Contents for White Raised Planter

Page 1: ...l Screws 12 General Information Read Instructions through carefully before beginning assembly When assembling components place on a non abrasive surface i e shipping box to avoid scratching We recommend an area approx 4 x 8 for unobstructed assembling You should not need to use excessive force when assembling components The 24 x36 White Raised Planter Please read through before starting assembly A...

Page 2: ...the shelf from the above step into the routed hole Do the same for the Front and Back Wall Panels as shown Note Only one side of the Shelf Rails will bottom out on the post This is designed to accomodate the attachment of an extension kit sold separately Align and insert the second Pre Assembled Side Wall Panel as shown Stand the planter box up and fasten the shelf rails to the posts using 8 of th...

Page 3: ...s on the posts as shown Fasten the corner brackets to the posts using 8 of the 1 1 2 screws provided through the pre drilled holes on the brackets as shown 5 www newenglandarbors com STEP TWO 5 6 The 24 x36 White Raised Planter Insert the floor support rail into the front and rear walls as shown Note the notch at the ends of the floor support rail 7 ...

Page 4: ...www newenglandarbors com 4 9 STEP TWO CONT D Place the four floor panels onto the floor supports as shown Note the notches on the one side of the end panels The notches are to wrap around the posts Pressure fit the Post Caps into place Push firmly until they snap into place 8 www newenglandarbors com 9 8 Notch Notch ...

Reviews:

No comments