www.newenglandarbors.com
www.newenglandarbors.co.uk
Slide the post trim followed by the post top trim as shown.
Let the two trims slide down for now as they will be glued in place in
later steps.
Attach the lamp post adapter onto the top of the post and fasten
in place with 4 screws as shown.
Note: Electrical cable should be threaded through the top of the
opening as shown.
Note: Make sure the flat side of all the trim pieces are flush to each
other.
1
2
STEP F O U R
5
Round Lamp Post Instructions
1
2
3
Apply a small amount of glue to the inside of the top trim where
it would come in contact with the lamp post adapter as shown.
Slide the top trim in place and hold for 20 seconds, allowing the
vinyl glue to set.
3
