Rafters Installation
Place brace assembly onto the post as shown.
Brace assembly should be against the outer edge of the post
(away from the pergola), and the top of the brace should
be flush to the top of the rafter.
Mark the location of the bracket and temporarily remove
the brace.
Fasten the bracket onto the post as shown using two
1-1/2” screws.
Re-install the brace and fasten into place using one
1-1/2” screw.
From the inside face of the rafter, fasten the brace
to the rafter using two 1-1/2” screws through the braces.
Pre-drilling may be required if you screw hits the steel
insert in the beam.
Repeat for all four corners.
1
2
3
STEP SE VEN (Continued)
4
5
2
3
4
1
Flush
16
10x10 Trellis
Pergola