2
STEP ONE
Assemble the
Arbor / Arch
Top
Lay out the two carrying beams as illustrated with pre-
drilled holes facing up.
Position the three rafters over the respective pre-drilled
holes on the carrying beams as illustrated.
Using the 3”
(
76 mm)
screws fasten the three middle
rafters to the carrying beams.
1
2
3
www.newenglandarbors.com
www.newenglandarbors.co.uk
STEP T WO
Insert the short horizontal spindles into the middle vertical
spindle (holes on both sides).
Slide the two outside vertical spindles into position as illustrated
(holes on one side).
Layout the bottom rail and insert the vertical spindles as
illustrated.
Slide horizontal mid-rail over the vertical spindles as illustrated.
Slide the horizontal curved rail down over the vertical
spindles as illustrated to complete one side panel.
Repeat for other side panel.
Assemble the Side Panels
1
2
3
4
5
6
1
2
3
1
3
4
5
2
Note: Middle Spindle is slightly shorter than Side Vertical Spindles.
The Fairfield Deluxe Arbor / Arch
