New England Arbors Savannah Composite Trellis Assembly Instructions Download Page 4

4

STEP THREE

Insert the ground anchoring stakes into the 

b

ottom of the trellis

posts.  Secure with screws as shown aside.

Mounting Into the Ground 

Install the Ground Anchor Stakes

Toll Free Phone:  1 800 282 9346  Toll Free Fax:  1 877 464 9286

 

www.newenglandarbors.com

3

Trellises must be well secured in the event of high winds, etc.  We 
have provided two ground anchoring stakes  for  securing  the  trellis
either  into   the   ground  or   into  a   concrete   footing.    If you are 
installing your trellis directly to the wall of your home, or on a wood deck 
or concrete surface, please see your hardware store for the appropriate 
galvanized bracket hardware.

STEP FOUR

M

ove the trellis to its final location.  

W

hen you are satisfied with

the location

,

 mark the positions of the posts

,

 then move the trellis

aside and lay it carefully on it

s side.  E

x

cavate the 2 post holes

appro

xim

at

ely 12" deep x 6" diame

ter.  Carefully move the trellis

back i

nto position.

Level it 

b

oth vertically and horizontally into the e

x

cavated holes.

Backfill the holes with the e

x

cavated soil.

Install Trellis into Ground

C

A

4

12”

Level

6“

B

Summary of Contents for Savannah Composite Trellis

Page 1: ...rill Hammer Tape Measure Level Shovel General Information Read Instructions through carefully before beginning assembly When assembling components place on a non abrasive surface i e shipping box to avoid scratching We recommend an area approx 5 x 8 for unobstructed assembling You should not need to use excessive force when assembling component Savannah Composite Trellis Please read through before...

Page 2: ...the top rail end into the post and progressively into each of the vertical spindles proceed to attach the second post to the trellis assembly as shown below Ensure tabs are inserted all the way into the post Insert the top arches into the post caps as shown Note that there is a sticker on each of the arches indicating the top of the arch Fasten the post caps to the arches using the eight screws pr...

Page 3: ...bottom of the arch while simultaneously inserting the arch assembly to the posts Excessive force should not be neccesary Fasten the arch assembly to the posts using the screws provided in the hardware kit Finish the trellis assembly by fastening the posts to the top and bottom rails as shown 1 2 3 4 1 2 3 Short Spindle Short Spindle Long Spindle Long Spindle 4 Savannah Composite Trellis www neweng...

Page 4: ...ncrete footing If you are installingyourtrellisdirectlytothewallofyourhome oronawooddeck orconcretesurface pleaseseeyourhardwarestorefortheappropriate galvanized bracket hardware STEP FOUR Move the trellis to its final location When you are satisfied with the location mark the positions of the posts then move the trellis aside and lay it carefully on it s side Excavate the 2 post holes approximate...

Reviews: