2 in
3 in
8 in
116 in
2 in
14
8 x 8 Corner Pergola
Rafter #2 Assembly
Take the 2x6x10’ board and notch out the ends as shown.
You may want to cut the 10’ board down to 116” first and then
notch out two, 6” x 3” sections on the underside as shown.
Insert the board through a joiner followed by the #2 Left and #2
Right Rafters as shown. Note: the stickers indicating the rafters
should meet inside the joiner.
Center the wood insert about the rafter and fasten the joiner with
four 1 1/2” screws as shown.
1
2
STEP SE VEN
www.newenglandarbors.com
3
1
2
3
Stickers
