2.3 Apply modules to such as ground, roofs etc. outdoor environment. If the modules are installed
on the roof, they must be installed on the roof with a certain fire protection capability. Consult the
local construction department to decide which roof material to use. Appropriate rack structure shall
be designed by system designer or installer.
2.4 Do not disconnect the cables of modules when modules are on operation.
2.5 Do not disassemble modules or move nameplate or any adhesion parts of modules.
2.6 Do not place the modules where it is easy to produce or gather combustible gases.
2.7 Artificially concentrated sunlight shall not be directed on the module.
2.8 Any dropping or covering on modules is not allowed. Do not tread, stand or walk on modules.
2.9 Do not pull or drag the modules by cables or connectors.
2.10 Keep children away from modules during transportation and installation.
2.11 Do not touch live terminals with bare hands. Use insulated tools for electrical connections.
2.12 Do not wear metal rings, bracelet, earrings, nose rings, lip rings or other metal accessories
during transportation and installation. After the modules are shipped to the installation site, all
packages should be carefully unpacked.
2.13 Do not drill on the glass surface of module which will void its warranty. Do not damage the
seal on the edge of the modules, otherwise the modules will fail. Damaged modules are
dangerous (electric shock and fire). Such modules can not be repaired or repaired and should be
replaced immediately.
2.14 In order to reduce the risk of electric shock or combustion, it is possible to cover the surface
of the modules with opaque material when installing modules.
2.15 Make sure the connection between the rack and PV module is firmly and without loosen.
2.16 All modules systems must be grounded. If there is no special requirement, please comply
with the International Electrical Standards or other international standards.
2.17 Do not wipe modules with corrosive chemicals.