NEW ENERGY B245/100E, Manual

Page: 15 / 19

GUANGDONG NEW ENERGY TECHNOLOGY DEVELOPMENT CO.,LTD.
ADD: No.66-68 Fengshen Avenue, Huadu District, Guangzhou City, CN WEB: www.ne01-e.com
15
1.3.6.1 Enter setting ;first pressing “ ” then press “ ” for 3 secs,the temperature display area display “00”
and blinking display ,input the password (default password “Fb”),then press “ ”or “ ”to add or
subtract ,press “ ”or “ ” to confirm ,if the password is wrong then exit current status ; if the password is
correct then enter parameter modification status ,temperature display area display parameters number and
blinking display ,setting temperature area display parameter content ;
1.3.6.2 Setting operation :after entering setting parameters, the parameter number blinking display ,press
“ ”or “ ”switch line to display each setting parameters number ,then press “ ”the parameters
content blinking display ,press “ ”or “ ” to modify current content ,after finishing press “ ” to save
current modification then back to parameters number display status .
1.3.6.3 Exit setting; press “ ”to exit parameters setting status or if there is not any pressing keys operation
will automatically exit parameters setting status.
1.3.7 Fault display; when unit fault occurs, the fault blinking display at setting temperature area, recycling
display fault code and temperature, after fault clear the controller recover normal display.
1.3.8 Clock setting:
1.3.8.1 Clock display: in unit shutdown status, long press any keys except “ ”, the temperature display area
display current time for one second.
1.3.8.2 Enter clock setting; long press “ ” for 3 secs.minutes part of clock area blinking display, means
entering clock setting status
1.3.8.3 Clock setting operation : enter clock setting status ,minutes part blinking display ,press “ ”or
“ ”to modify minute value .Then press “ ”,hours part blinking display ,press “ ”or “ ”to modify
hour value ,press “ ” to save current setting then exit or if there is not any pressing keys operation will
automatically save current setting then exit.
1.3.9.1 There are 2 group timing units, 1
～
2 group ,each timing unit group can set as “timing startup ”timing
shutdown ”.Default setting is “invalid”, means timing startup and timing timing shutdown is same.
1.3.9.2 Enter timing setting :short press “ ”,symbol “1 ”
、
“ON ”at left bottom screen blinking display ,minutes
display area blinking means enter “1 unit timing startup ”setting status ,the minute position blinking
display ,press “ ”or “ ”to modify minute value ,then press “ ” to confirm then enter hour setting ,the