- 11 -
6-2. Wire Connection/Disconnection to/from Terminal Block
6-2-1. Power Terminal Block
6-2-2. External Output Terminal Block
6-3. Cable Tie Installation
Use a cable tie for bundling the in-coming cables through the
cable entry and secure
them to the unit’s wall.
The unit has a cable tie holder inside its case near the bottom.
Pre-install a cable tie by feeding it thru the tie holder and make
a loop. To easily bundle the wiring of in-coming cables to the
terminal block, feed these cables thru this loop and secure to
the case wall.
Cable tie
Cable entry
Insert each pin terminal to its
corresponding slot on the terminal block.
(Connection)
(Disconnection)
While pressing the release button with a
precision screwdriver (recommended tip
thickness: 2.6 mm), lift the pin terminal.
(Disconnection)
(Connection)
Insert each pin terminal to its
corresponding slot on the terminal block.
While pressing the release button with a
precision screwdriver (recommended tip
thickness: 3.0 mm), lift the pin terminal.
Summary of Contents for KS-7D
Page 38: ... Blank page ...
Page 39: ... Blank page ...