10
http://www.NewAir.com
TO SET THE THERMOSTAT
Press the
button, then press the + or -buttons to change the target
temperature. The thermometer symbol will illuminate, and the digital display
will flash, showing the target temperature. After 5 seconds the display will stop
flashing and return to displaying the room temperature. It can be set from 32
F
- 97
F
TO SET THE TIMER
Press the
button. The clock symbol will illuminate. Then use the
+/- buttons to set the number of hours for which the heater is to run
before automatically switching off. It can be set from 0.5-18 hours.
Unplug the appliance when not in use. The cable can be wrapped
around the plastic cable storage location on the front panel.
The heater operates when both the power switch and thermostat
function are activated.
The red indicator light will turn on and will be on as long as the plug is
in the socket, even if the appliance does not operate.
To switch the heater off fully, press the
button.
SAFETY FEATURES
OVERHEAT PROTECTION
This heater is protected with an over-heat protection mechanism that
switches it off automatically if it over-heats.
Overheating can be caused by obstruction to the air intakes on the
back of the heater or the grill on the front.
If this occurs please disconnect the heater from the power supply and
allow it to cool for 30 minutes. Remove any obstruction and turn the
heater back on.
The heater should operate normally.
Should the problem persist, contact your nearest service center.