Nevir NVR-7410-46HD-N, Instruction Manual

Page: 49 / 81

Install And Connect TV
7
TV ANT FM ANT
TV signal output
Set your TV
To put your TV in a fi rm place which can
bear the weight of the TV.
To avoid danger, please don’t expose the
TV near water or heating place (such as
light, candle, heating machine),do not block
the ventilation at the back of TV.
Connect antenna and power
1.Connect the antenna cable to the antenna
socket on the back of the TV.
2.To plug the power cord of TV (AC 100-
240V~ 50/60Hz).
1
3
Turn on TV
3.Press the power button of the TV the
indication light will turn to green. if it is
on standby mode (the light is red),press
the power button on the remote control
to turn on the TV.
Note:
Picture for reference purposes only.
2
TV Stand Installation Instructions
1.
and scattered accessories and base
(some models without base).
2.to avoid the injury of the TV, covered
with a soft mattress, put it on the table, face
down on a soft mattress, the base of the
neck is fi xed on the TV with screws.
3.screw the base and connected to the TV.
4. the installation is complete.
Open the carton and remove the TV
Note:
Picture for reference purposes only.
Please prevail in kind