DO NOT CONNECT FM ANTENNA TO AN EXTERNAL ANTENNA
The Dial Scale shows the frequency in MHz (for FM) or kHz (for AM).
incline and turn the antenna (13).
Reduce its length if the FM signal is too strong (very close to a transmitter).
Rotate the radio itself to receive an optimum reception.
During operation, depress to stop all deck operation. Press again to open the
cassette door.
Press to rapidly advance the tape in either forward or reverse direction.
Press to start playback.
Press to stop tape operation temporarily. Press again to resume tape operation.
Press to start recording. PLAY button(9) will be activated automatically.
the exposed section upward (playback side facing you).
remove your cassette tape.
RADIO
OPERATION
Set the FUNCTION switch (2) to the RADIO position.
Select the desired radio frequency band with the BAND SELECTOR (3).
Turn the TUNING KNOB (11) until desired radio station has been tuned in.
To turn off the radio, set the FUNCTION Switch (2) to the TAPE position.
ANTENNA
For FM reception, pull out the telescopic antenna (13). To improve reception,
For AM reception, the signals are picked up through the built-in ferrite antenna.
CASSETTE RECORDER
CONTROLS
STOP/EJECT button(6)
FAST FORWARD button(7) and REWIND button(8)
PLAY button(9)
PAUSE button(5)
RECORD button(10)
INSERTION AND REMOVAL OF CASSETTE TAPE
Press the STOP/EJECT button (6) to open the cassette door.
Insert a cassette into the holding position on the inside of the cassette door, with
Close the cassette door securely before starting.
When finished, press the STOP/EJECT button (6) to open the cassette door and
CASSETTE PLAYBACK
Set the FUNCTION switch (2) to the TAPE position.
Press the STOP/EJECT button (6).
Insert a pre-recorded tape into the cassette compartment.
Close the door gently.
Press the PLAY button (9) to activate playback.
Adjust the VOLUME control (1) to the desired sound level.
Press the STOP/EJECT button (6) when finished.
-Page 3
