neverdark CHALET, User Manual

Page: 20 / 36

i) During refueling, watch the fuel level indication on the display. When the tank fills
up, the FULL TANK will appear on the display and the pump will automatically turn
off.
j)
If you need to stop the fuel filling before the tank is full, you can do so at any time
by pressing STOP.
Tip!
Before stopping the refueling, take the fuel hose out of the tank and lift it up with
the opening. Then wait a few seconds for the pump to pump out the fuel that is in the
fuel hose. Only then can the hose be disconnected from the connector (install the hose
in the ARS-500 External Module).
Warning! If there is any fuel left in the fuel hose that leaked out on or near the surface
of the fireplace when you disconnect the hose, be sure to wipe the spilled fuel with a
soft cloth immediately.
k)
Close the fuel canister after refueling and press CANCEL to exit the refueling mode.
l)
Now the fireplace is ready for use.
17