Nevadent NAZ 2.4 C3, Operating Instructions Manual, Page: 24 / 102

GB
│
IE
│ 21 ■ NAZ 2.4 C3
Operation
This toothbrush has 3 different power levels:
–
“Clean”: normal speed, orange “Clean” LED
4
For cleaning the teeth .
–
“Sensitive”: slow speed, green “Sensitive” LED
5
For cleaning the teeth if you have sensitive gums .
–
“Massage”: slow speed with short breaks, yellow “Massage” LED
6
For massaging the gums .
■ Press the On/Off switch
3
once to activate the “Clean” mode . The “Clean”
LED
4
lights up .
■ Press once more to switch to “Sensitive” mode . The “Sensitive” LED
5
lights up .
■ Press a third time to switch to “Massage” mode . The “Massage” LED
6
lights up .
■ To switch the toothbrush off, press the On/Off switch
3
once more .
Brushing teeth
WARNING!
Due to the unaccustomed effect of the toothbrush, there may be some
initial gum bleeding . This is normal . If this continues for more than two
weeks, you should consult your dentist .
1) Place the brush head
1
on the handset .
2) Moisten the brush under flowing water .
3) Put a little toothpaste onto the wet brush .
NOTE
To avoid spray, do not switch on the appliance until it is in your mouth .
4) Use the On/Off switch
3
to select the desired operating mode .
NOTE
This toothbrush has a 30-second interval timer, so that all four jaw quad-
rants can be cleaned evenly .