43
NAZ 2.4 A1
GB
Fitting/removing brush heads
■
To remove the brush head
2
, turn it clockwise
and then pull it upwards.
■
To fi t the brush head
2
place it slightly off set
on the hand element and then turn it anti-
clockwise.
NOTE
To avoid damage to the appliance, always use
original brush heads.
(For replacement brush heads, see the order
card)
Operation
This toothbrush has 3 diff erent performing levels:
–
"Clean": normal speed,
orange "Clean" LED
4
.
For cleaning the teeth.
–
"Soft": slow speed, green "Soft" LED
5
.
For cleaning the teeth of people with
sensitive gums.
–
"Pulse": alternating speeds,
yellow "Pulse" LED
6
.
For massaging the gums.
■
Press the on/off switch
3
once to activate the
"Clean" mode. The "Clean" LED
4
lights up.
■
Press once more to switch to "Soft" mode.
The "Soft" LED
5
lights up.
■
Press it a third time to switch to "Pulse" mode.
The "Pulse" LED
6
lights up.
■
To switch the toothbrush off , press the on/off
switch
3
once more.
Brushing teeth
WARNING!
Due to the unaccustomed eff ect of the tooth-
brush, there may be some initial gum bleeding.
This is normal. If this continues for more than
two weeks, you should consult your dentist.
1) Place the brush head
2
on the handset.
2) Moisten the brush under fl owing water.
3) Put a little toothpaste onto the wet brush.
NOTE
To avoid spray, do not switch on the appliance
until it is in your mouth
4) Use the on/off switch
3
to select the desired
operating mode.
NOTE
This toothbrush has a 30-second interval timer,
so that all four jaw quadrants can be cleaned
evenly.
5) Divide your mouth into four parts (quadrants):
upper left, upper right, lower left and lower
right.
IB_42776_NAZ2.4A1_LBCH.indb 43
12.11.14 15:09
Summary of Contents for NAZ 2.4 A1
Page 3: ......