Nevadent 368332 2101, Operating Instructions Manual, Page: 9 / 117

■ 6
│
GB│IE
NZAK 3.7 A1
Operating components
(See fold-out page for illustrations)
1
Normal brush head
2
Drive shaft
3
On/Off programme selection button
4
Charging indicator lamp
5
Charger
6
Small brush head
Handling and operation
This section provides you with important information on handling and using the appliance .
Charging the battery
♦ Connect the charger
5
to a mains power socket .
♦ Place the switched-off handset on the charger
5
. The charging indicator lamp
4
lights up red during charging . It takes approximately 10 hours for the empty battery
to be fully charged . Once the handset is fully charged, the charging indicator lamp
4
lights up green .
♦ If the charging indicator lamp
4
starts flashing red, the battery is empty and needs
to be recharged .
NOTE
► Place the handset back on the charger
5
after use . This ensures that your tooth-
brush always operates at its optimum performance . The battery is not damaged
by regular charging .
Using the brush heads
2 brush heads (1 x normal
1
,
1 x small
6
) are supplied with the appliance . Before first
use, clean the brush heads
1
/
6
in fresh running water .
♦ Select a suitable brush head
1
/
6
and insert it from above onto the drive shaft
2
of the handset . Ensure that the drive shaft
2
slides precisely into the socket on the
brush head
1
/
6
. Push the brush head
1
/
6
down until it completely covers the drive
shaft
2
.
♦ To remove the brush head
1
/
6
, pull it upwards and off the drive shaft
2
.