21
GB
6. Charging the battery
NOTES:
•
Fully charge the battery before using it
for the first time.
•
It takes approx. 16 hours to fully charge
the battery.
•
Place the toothbrush
6
on the peg
8
of
the battery charger after use. This en-
sures that the toothbrush
6
always
works at full power. The battery is not
damaged by regular charging.
1. Plug the mains plug
10
of the battery
charger
9
into a suitable wall socket.
The wall socket must still be easily acces-
sible after connection.
2. Place the switched-off toothbrush
6
onto
the peg of the battery charger
8
.
The charging indicator light
12
is lit red
throughout the entire charging process.
When the optimal charging state has
been reached, the charging indicator
light
12
turns green.
Battery signals: charging
indicator light
12
Toothbrush
6
on the battery charger
9
:
-
Charging indicator light
12
is lit green:
the battery is fully charged.
-
Charging indicator light
12
is lit red:
the battery is being charged.
Toothbrush
6
switched on:
-
The toothbrush
6
switches itself off and
the charging indicator light
12
flashes
red: the battery is weak. Charge the
battery.
7. Toothbrush heads
The items supplied include 4 toothbrush
heads
3
.
The various marking rings
4
allow you to as-
sign the toothbrush heads
3
to different fam-
ily members.
• Take a toothbrush head
3
and slide it
onto the shaft of the toothbrush
5
.
• In order to remove, carefully pull the
toothbrush head
3
off upwards.
•
Figure B:
the indicator bristles
16
on
the brush head
2
slowly lose their col-
our during use. The decolouration
shows when the toothbrush heads
3
should be replaced.
NOTE:
we recommend that you replace the
toothbrush heads
3
every 3 months or after
infections (see “Ordering toothbrush heads”
on page 25).
__332855_1907_B5.book Seite 21 Dienstag, 5. November 2019 11:11 11